rama::net::stream::matcher::ip

Enum IpNet

source
pub enum IpNet {
    V4(Ipv4Net),
    V6(Ipv6Net),
}
Expand description

An IP network address, either IPv4 or IPv6.

This enum can contain either an Ipv4Net or an Ipv6Net. A From implementation is provided to convert these into an IpNet.

§Textual representation

IpNet provides a FromStr implementation for parsing network addresses represented in CIDR notation. See IETF RFC 4632 for the CIDR notation.

§Examples

use std::net::IpAddr;
use ipnet::IpNet;

let net: IpNet = "10.1.1.0/24".parse().unwrap();
assert_eq!(Ok(net.network()), "10.1.1.0".parse());

let net: IpNet = "fd00::/32".parse().unwrap();
assert_eq!(Ok(net.network()), "fd00::".parse());

Variants§

Implementations§

source§

impl IpNet

source

pub fn new(ip: IpAddr, prefix_len: u8) -> Result<IpNet, PrefixLenError>

Creates a new IP network address from an IpAddr and prefix length.

§Examples
use std::net::Ipv6Addr;
use ipnet::{IpNet, PrefixLenError};

let net = IpNet::new(Ipv6Addr::LOCALHOST.into(), 48);
assert!(net.is_ok());
 
let bad_prefix_len = IpNet::new(Ipv6Addr::LOCALHOST.into(), 129);
assert_eq!(bad_prefix_len, Err(PrefixLenError));
source

pub const fn new_assert(ip: IpAddr, prefix_len: u8) -> IpNet

Creates a new IP network address from an IpAddr and prefix length. If called from a const context it will verify prefix length at compile time. Otherwise it will panic at runtime if prefix length is incorrect for a given IpAddr type.

§Examples
use std::net::{IpAddr, Ipv4Addr, Ipv6Addr};
use ipnet::{IpNet};

// This code is verified at compile time:
const NET: IpNet = IpNet::new_assert(IpAddr::V4(Ipv4Addr::new(10, 1, 1, 0)), 24);
assert_eq!(NET.prefix_len(), 24);

// This code is verified at runtime:
let net = IpNet::new_assert(Ipv6Addr::LOCALHOST.into(), 24);
assert_eq!(net.prefix_len(), 24);

// This code does not compile:
// const BAD_PREFIX_LEN: IpNet = IpNet::new_assert(IpAddr::V4(Ipv4Addr::new(10, 1, 1, 0)), 33);

// This code panics at runtime:
// let bad_prefix_len = IpNet::new_assert(Ipv6Addr::LOCALHOST.into(), 129);
source

pub fn with_netmask( ip: IpAddr, netmask: IpAddr, ) -> Result<IpNet, PrefixLenError>

Creates a new IP network address from an IpAddr and netmask.

§Examples
use std::net::Ipv6Addr;
use ipnet::{IpNet, PrefixLenError};

let net = IpNet::with_netmask(Ipv6Addr::LOCALHOST.into(), Ipv6Addr::from(0xffff_ffff_ffff_0000_0000_0000_0000_0000).into());
assert!(net.is_ok());

let bad_prefix_len = IpNet::with_netmask(Ipv6Addr::LOCALHOST.into(), Ipv6Addr::from(0xffff_ffff_ffff_0000_0001_0000_0000_0000).into());
assert_eq!(bad_prefix_len, Err(PrefixLenError));
source

pub fn trunc(&self) -> IpNet

Returns a copy of the network with the address truncated to the prefix length.

§Examples
assert_eq!(
    "192.168.12.34/16".parse::<IpNet>().unwrap().trunc(),
    "192.168.0.0/16".parse().unwrap()
);

assert_eq!(
    "fd00::1:2:3:4/16".parse::<IpNet>().unwrap().trunc(),
    "fd00::/16".parse().unwrap()
);
source

pub fn addr(&self) -> IpAddr

Returns the address.

source

pub fn prefix_len(&self) -> u8

Returns the prefix length.

source

pub fn max_prefix_len(&self) -> u8

Returns the maximum valid prefix length.

source

pub fn netmask(&self) -> IpAddr

Returns the network mask.

§Examples
let net: IpNet = "10.1.0.0/20".parse().unwrap();
assert_eq!(Ok(net.netmask()), "255.255.240.0".parse());

let net: IpNet = "fd00::/24".parse().unwrap();
assert_eq!(Ok(net.netmask()), "ffff:ff00::".parse());
source

pub fn hostmask(&self) -> IpAddr

Returns the host mask.

§Examples
let net: IpNet = "10.1.0.0/20".parse().unwrap();
assert_eq!(Ok(net.hostmask()), "0.0.15.255".parse());

let net: IpNet = "fd00::/24".parse().unwrap();
assert_eq!(Ok(net.hostmask()), "::ff:ffff:ffff:ffff:ffff:ffff:ffff".parse());
source

pub fn network(&self) -> IpAddr

Returns the network address.

§Examples
let net: IpNet = "172.16.123.123/16".parse().unwrap();
assert_eq!(Ok(net.network()), "172.16.0.0".parse());

let net: IpNet = "fd00:1234:5678::/24".parse().unwrap();
assert_eq!(Ok(net.network()), "fd00:1200::".parse());
source

pub fn broadcast(&self) -> IpAddr

Returns the broadcast address.

§Examples
let net: IpNet = "172.16.0.0/22".parse().unwrap();
assert_eq!(Ok(net.broadcast()), "172.16.3.255".parse());

let net: IpNet = "fd00:1234:5678::/24".parse().unwrap();
assert_eq!(Ok(net.broadcast()), "fd00:12ff:ffff:ffff:ffff:ffff:ffff:ffff".parse());
source

pub fn supernet(&self) -> Option<IpNet>

Returns the IpNet that contains this one.

§Examples
let n1: IpNet = "172.16.1.0/24".parse().unwrap();
let n2: IpNet = "172.16.0.0/23".parse().unwrap();
let n3: IpNet = "172.16.0.0/0".parse().unwrap();

assert_eq!(n1.supernet().unwrap(), n2);
assert_eq!(n3.supernet(), None);

let n1: IpNet = "fd00:ff00::/24".parse().unwrap();
let n2: IpNet = "fd00:fe00::/23".parse().unwrap();
let n3: IpNet = "fd00:fe00::/0".parse().unwrap();

assert_eq!(n1.supernet().unwrap(), n2);
assert_eq!(n3.supernet(), None);
source

pub fn is_sibling(&self, other: &IpNet) -> bool

Returns true if this network and the given network are children of the same supernet.

§Examples
let n4_1: IpNet = "10.1.0.0/24".parse().unwrap();
let n4_2: IpNet = "10.1.1.0/24".parse().unwrap();
let n4_3: IpNet = "10.1.2.0/24".parse().unwrap();
let n6_1: IpNet = "fd00::/18".parse().unwrap();
let n6_2: IpNet = "fd00:4000::/18".parse().unwrap();
let n6_3: IpNet = "fd00:8000::/18".parse().unwrap();

assert!( n4_1.is_sibling(&n4_2));
assert!(!n4_2.is_sibling(&n4_3));
assert!( n6_1.is_sibling(&n6_2));
assert!(!n6_2.is_sibling(&n6_3));
assert!(!n4_1.is_sibling(&n6_2));
source

pub fn hosts(&self) -> IpAddrRange

Return an Iterator over the host addresses in this network.

§Examples
let net: IpNet = "10.0.0.0/30".parse().unwrap();
assert_eq!(net.hosts().collect::<Vec<IpAddr>>(), vec![
    "10.0.0.1".parse::<IpAddr>().unwrap(),
    "10.0.0.2".parse().unwrap(),
]);

let net: IpNet = "10.0.0.0/31".parse().unwrap();
assert_eq!(net.hosts().collect::<Vec<IpAddr>>(), vec![
    "10.0.0.0".parse::<IpAddr>().unwrap(),
    "10.0.0.1".parse().unwrap(),
]);

let net: IpNet = "fd00::/126".parse().unwrap();
assert_eq!(net.hosts().collect::<Vec<IpAddr>>(), vec![
    "fd00::".parse::<IpAddr>().unwrap(),
    "fd00::1".parse().unwrap(),
    "fd00::2".parse().unwrap(),
    "fd00::3".parse().unwrap(),
]);
source

pub fn subnets(&self, new_prefix_len: u8) -> Result<IpSubnets, PrefixLenError>

Returns an Iterator over the subnets of this network with the given prefix length.

§Examples
let net: IpNet = "10.0.0.0/24".parse().unwrap();
assert_eq!(net.subnets(26).unwrap().collect::<Vec<IpNet>>(), vec![
    "10.0.0.0/26".parse::<IpNet>().unwrap(),
    "10.0.0.64/26".parse().unwrap(),
    "10.0.0.128/26".parse().unwrap(),
    "10.0.0.192/26".parse().unwrap(),
]);

let net: IpNet = "fd00::/16".parse().unwrap();
assert_eq!(net.subnets(18).unwrap().collect::<Vec<IpNet>>(), vec![
    "fd00::/18".parse::<IpNet>().unwrap(),
    "fd00:4000::/18".parse().unwrap(),
    "fd00:8000::/18".parse().unwrap(),
    "fd00:c000::/18".parse().unwrap(),
]);

let net: IpNet = "10.0.0.0/24".parse().unwrap();
assert_eq!(net.subnets(23), Err(PrefixLenError));

let net: IpNet = "10.0.0.0/24".parse().unwrap();
assert_eq!(net.subnets(33), Err(PrefixLenError));

let net: IpNet = "fd00::/16".parse().unwrap();
assert_eq!(net.subnets(15), Err(PrefixLenError));

let net: IpNet = "fd00::/16".parse().unwrap();
assert_eq!(net.subnets(129), Err(PrefixLenError));
source

pub fn contains<T>(&self, other: T) -> bool
where IpNet: Contains<T>,

Test if a network address contains either another network address or an IP address.

§Examples
let net4: IpNet = "192.168.0.0/24".parse().unwrap();
let net4_yes: IpNet = "192.168.0.0/25".parse().unwrap();
let net4_no: IpNet = "192.168.0.0/23".parse().unwrap();
let ip4_yes: IpAddr = "192.168.0.1".parse().unwrap();
let ip4_no: IpAddr = "192.168.1.0".parse().unwrap();

assert!(net4.contains(&net4));
assert!(net4.contains(&net4_yes));
assert!(!net4.contains(&net4_no));
assert!(net4.contains(&ip4_yes));
assert!(!net4.contains(&ip4_no));


let net6: IpNet = "fd00::/16".parse().unwrap();
let net6_yes: IpNet = "fd00::/17".parse().unwrap();
let net6_no: IpNet = "fd00::/15".parse().unwrap();
let ip6_yes: IpAddr = "fd00::1".parse().unwrap();
let ip6_no: IpAddr = "fd01::".parse().unwrap();

assert!(net6.contains(&net6));
assert!(net6.contains(&net6_yes));
assert!(!net6.contains(&net6_no));
assert!(net6.contains(&ip6_yes));
assert!(!net6.contains(&ip6_no));

assert!(!net4.contains(&net6));
assert!(!net6.contains(&net4));
assert!(!net4.contains(&ip6_no));
assert!(!net6.contains(&ip4_no));
source

pub fn aggregate(networks: &Vec<IpNet>) -> Vec<IpNet>

Aggregate a Vec of IpNets and return the result as a new Vec.

§Examples
let nets = vec![
    "10.0.0.0/24".parse::<IpNet>().unwrap(),
    "10.0.1.0/24".parse().unwrap(),
    "10.0.2.0/24".parse().unwrap(),
    "fd00::/18".parse().unwrap(),
    "fd00:4000::/18".parse().unwrap(),
    "fd00:8000::/18".parse().unwrap(),
];

assert_eq!(IpNet::aggregate(&nets), vec![
    "10.0.0.0/23".parse::<IpNet>().unwrap(),
    "10.0.2.0/24".parse().unwrap(),
    "fd00::/17".parse().unwrap(),
    "fd00:8000::/18".parse().unwrap(),
]);

Trait Implementations§

source§

impl Clone for IpNet

source§

fn clone(&self) -> IpNet

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for IpNet

source§

fn fmt(&self, fmt: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more
source§

impl Default for IpNet

source§

fn default() -> IpNet

Returns the “default value” for a type. Read more
source§

impl Display for IpNet

source§

fn fmt(&self, fmt: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more
source§

impl From<IpAddr> for IpNet

source§

fn from(addr: IpAddr) -> IpNet

Converts to this type from the input type.
source§

impl From<Ipv4Net> for IpNet

source§

fn from(net: Ipv4Net) -> IpNet

Converts to this type from the input type.
source§

impl From<Ipv6Net> for IpNet

source§

fn from(net: Ipv6Net) -> IpNet

Converts to this type from the input type.
source§

impl FromStr for IpNet

source§

type Err = AddrParseError

The associated error which can be returned from parsing.
source§

fn from_str(s: &str) -> Result<IpNet, AddrParseError>

Parses a string s to return a value of this type. Read more
source§

impl Hash for IpNet

source§

fn hash<__H>(&self, state: &mut __H)
where __H: Hasher,

Feeds this value into the given Hasher. Read more
1.3.0 · source§

fn hash_slice<H>(data: &[Self], state: &mut H)
where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more
source§

impl Ord for IpNet

source§

fn cmp(&self, other: &IpNet) -> Ordering

This method returns an Ordering between self and other. Read more
1.21.0 · source§

fn max(self, other: Self) -> Self
where Self: Sized,

Compares and returns the maximum of two values. Read more
1.21.0 · source§

fn min(self, other: Self) -> Self
where Self: Sized,

Compares and returns the minimum of two values. Read more
1.50.0 · source§

fn clamp(self, min: Self, max: Self) -> Self
where Self: Sized,

Restrict a value to a certain interval. Read more
source§

impl PartialEq for IpNet

source§

fn eq(&self, other: &IpNet) -> bool

Tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl PartialOrd for IpNet

source§

fn partial_cmp(&self, other: &IpNet) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
1.0.0 · source§

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator. Read more
1.0.0 · source§

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator. Read more
1.0.0 · source§

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator. Read more
1.0.0 · source§

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator. Read more
source§

impl Copy for IpNet

source§

impl Eq for IpNet

§

impl IntoIpNet for IpNet

source§

impl StructuralPartialEq for IpNet

Auto Trait Implementations§

§

impl Freeze for IpNet

§

impl RefUnwindSafe for IpNet

§

impl Send for IpNet

§

impl Sync for IpNet

§

impl Unpin for IpNet

§

impl UnwindSafe for IpNet

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> CloneToUninit for T
where T: Clone,

source§

unsafe fn clone_to_uninit(&self, dst: *mut T)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dst. Read more
§

impl<Q, K> Comparable<K> for Q
where Q: Ord + ?Sized, K: Borrow<Q> + ?Sized,

§

fn compare(&self, key: &K) -> Ordering

Compare self to key and return their ordering.
§

impl<T> Conv for T

§

fn conv<T>(self) -> T
where Self: Into<T>,

Converts self into T using Into<T>. Read more
§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

§

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more
§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

§

fn equivalent(&self, key: &K) -> bool

Compare self to key and return true if they are equal.
§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

§

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more
§

impl<T> FmtForward for T

§

fn fmt_binary(self) -> FmtBinary<Self>
where Self: Binary,

Causes self to use its Binary implementation when Debug-formatted.
§

fn fmt_display(self) -> FmtDisplay<Self>
where Self: Display,

Causes self to use its Display implementation when Debug-formatted.
§

fn fmt_lower_exp(self) -> FmtLowerExp<Self>
where Self: LowerExp,

Causes self to use its LowerExp implementation when Debug-formatted.
§

fn fmt_lower_hex(self) -> FmtLowerHex<Self>
where Self: LowerHex,

Causes self to use its LowerHex implementation when Debug-formatted.
§

fn fmt_octal(self) -> FmtOctal<Self>
where Self: Octal,

Causes self to use its Octal implementation when Debug-formatted.
§

fn fmt_pointer(self) -> FmtPointer<Self>
where Self: Pointer,

Causes self to use its Pointer implementation when Debug-formatted.
§

fn fmt_upper_exp(self) -> FmtUpperExp<Self>
where Self: UpperExp,

Causes self to use its UpperExp implementation when Debug-formatted.
§

fn fmt_upper_hex(self) -> FmtUpperHex<Self>
where Self: UpperHex,

Causes self to use its UpperHex implementation when Debug-formatted.
§

fn fmt_list(self) -> FmtList<Self>
where &'a Self: for<'a> IntoIterator,

Formats each item in a sequence. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

§

impl<T> FutureExt for T

§

fn with_context(self, otel_cx: Context) -> WithContext<Self>

Attaches the provided Context to this type, returning a WithContext wrapper. Read more
§

fn with_current_context(self) -> WithContext<Self>

Attaches the current Context to this type, returning a WithContext wrapper. Read more
§

impl<T> Instrument for T

§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more
§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> IntoEither for T

source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
§

impl<T> Pipe for T
where T: ?Sized,

§

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> R
where Self: Sized,

Pipes by value. This is generally the method you want to use. Read more
§

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> R
where R: 'a,

Borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R
where R: 'a,

Mutably borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
where Self: Borrow<B>, B: 'a + ?Sized, R: 'a,

Borrows self, then passes self.borrow() into the pipe function. Read more
§

fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R, ) -> R
where Self: BorrowMut<B>, B: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more
§

fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
where Self: AsRef<U>, U: 'a + ?Sized, R: 'a,

Borrows self, then passes self.as_ref() into the pipe function.
§

fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
where Self: AsMut<U>, U: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.as_mut() into the pipe function.
§

fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
where Self: Deref<Target = T>, T: 'a + ?Sized, R: 'a,

Borrows self, then passes self.deref() into the pipe function.
§

fn pipe_deref_mut<'a, T, R>( &'a mut self, func: impl FnOnce(&'a mut T) -> R, ) -> R
where Self: DerefMut<Target = T> + Deref, T: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.deref_mut() into the pipe function.
§

impl<T> Pointable for T

§

const ALIGN: usize = _

The alignment of pointer.
§

type Init = T

The type for initializers.
§

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more
§

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more
§

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more
§

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more
§

impl<T> PolicyExt for T
where T: ?Sized,

§

fn and<S, P, B, E>(self, other: P) -> And<T, P>
where T: Policy<S, B, E>, P: Policy<S, B, E>,

Create a new Policy that returns Action::Follow only if self and other return Action::Follow. Read more
§

fn or<S, P, B, E>(self, other: P) -> Or<T, P>
where T: Policy<S, B, E>, P: Policy<S, B, E>,

Create a new Policy that returns Action::Follow if either self or other returns Action::Follow. Read more
source§

impl<T> Same for T

source§

type Output = T

Should always be Self
§

impl<T> Tap for T

§

fn tap(self, func: impl FnOnce(&Self)) -> Self

Immutable access to a value. Read more
§

fn tap_mut(self, func: impl FnOnce(&mut Self)) -> Self

Mutable access to a value. Read more
§

fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Immutable access to the Borrow<B> of a value. Read more
§

fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Mutable access to the BorrowMut<B> of a value. Read more
§

fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Immutable access to the AsRef<R> view of a value. Read more
§

fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Mutable access to the AsMut<R> view of a value. Read more
§

fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Immutable access to the Deref::Target of a value. Read more
§

fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Mutable access to the Deref::Target of a value. Read more
§

fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self

Calls .tap() only in debug builds, and is erased in release builds.
§

fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self

Calls .tap_mut() only in debug builds, and is erased in release builds.
§

fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Calls .tap_borrow() only in debug builds, and is erased in release builds.
§

fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Calls .tap_borrow_mut() only in debug builds, and is erased in release builds.
§

fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Calls .tap_ref() only in debug builds, and is erased in release builds.
§

fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Calls .tap_ref_mut() only in debug builds, and is erased in release builds.
§

fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Calls .tap_deref() only in debug builds, and is erased in release builds.
§

fn tap_deref_mut_dbg<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Calls .tap_deref_mut() only in debug builds, and is erased in release builds.
source§

impl<T> ToOwned for T
where T: Clone,

source§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T> ToString for T
where T: Display + ?Sized,

source§

default fn to_string(&self) -> String

Converts the given value to a String. Read more
§

impl<T> ToStringFallible for T
where T: Display,

§

fn try_to_string(&self) -> Result<String, TryReserveError>

ToString::to_string, but without panic on OOM.

§

impl<T> TryConv for T

§

fn try_conv<T>(self) -> Result<T, Self::Error>
where Self: TryInto<T>,

Attempts to convert self into T using TryInto<T>. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

source§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
§

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

§

fn vzip(self) -> V

§

impl<T> WithSubscriber for T

§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a [WithDispatch] wrapper. Read more
§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a [WithDispatch] wrapper. Read more
§

impl<T> ErasedDestructor for T
where T: 'static,

§

impl<T> MaybeSendSync for T